Packaging Operator - DuPont - Terre Haute, IN
Key Elements include, but are not limited to:
Monitor shop operations through use of the distributed process control Operator Interface Unit.
Perform shop start-up activities including changing equipment filters, testing metal detectors, completing check-weigh documentation, and running test bags.
Complete end of shift tasks such as shift documentation, wet sifting, and Tennant floor cleaner operation.
Perform Lot Change requirements including ending and beginning documentation, and subdivision of samples.
Operate the Icoma Bagger, Premier Tech bagger, bulk filling device, palletizer, tote filling, and drum filling devices. These activities require cleaning vacuum probes and fill heads, changing stretch wrap film, changing filter receiver bags, and other tasks.
Perform sanitation tasks as required by the Master Sanitation Schedule.
Introduce rework into the process as required.
Run sieve analysis for specific product types and forms.
Disassemble, clean and reassemble packaging equipment.
Move and position semi-trailers used for bulk product transport utilizing the Ottawa truck tractor.
Comprehend and comply with all requirements of the quality, environmental, and safety management systems.
Sample and document the process at various intervals, monitoring and recording data.
Perform minor mechanical tasks ensuring that equipment is in good operating condition.
Operate within GMP guidelines at all times, paying particular attention to area housekeeping.
Assist in the completion of other departmental tasks as required.
Perform activities per the Hazardous Waste and DOT Hazardous Material – Position Description Appendix, EDOC-030
Job Qualifications
The following are required:
High school diploma and at least one year of experience in a production or manufacturing facility (or Associate’s degree in a technical field of study)
Valid Indiana driver’s license
Willingness to obtain forklift certification
Ability to perform basic math skills, use simple technical formulas, and work with charts/tables
Ability to work 10 – 12 hour day shifts, seven days per week, including holidays. Must work overtime as required
Ability to repeatedly lift 55 pounds
Ability to complete work while wearing a respirator
The following are preferred:
Associate’s degree in a technical field and/or chemical process operations experience
Knowledge of or experience with process control systems (Fisher, Bailey, etc.) personal computers, and software such as Notes, Excel, and Word is highly desired
0 comments:
Post a Comment