Dica: Labs gratuitos para quem pretende tirar certificação Cisco

Recentemente conheci o site http://www.azires.com/ que oferece vários Labs Cisco gratuitamente que são muito úteis para quem está estudando para tirar certificações Cisco. São oferecidos também materiais de estudo e dicas para conseguir a tão sonhada certificação.

Nos links abaixo vocês poderão acessar os Labs CCNA, CCNP ROUTE e CCNP SWITCH, que são úteis tanto para treinar para o exame como para o dia a dia.

Neste link vocês encontraram os seguintes Labs para CCNA:

LAB 1: Console Login; LAB 2: Telnetting to a Remote Router; LAB 3: Router Configuration; LAB 4: Copy to NVRAM; LAB 5: Copy to TFTP Server; LAB 6: Copy from the TFTP Server; LAB 7: Limiting VTY Access; LAB 8: Password Recovery; LAB 9: Loading the 2600 IOS; LAB 10: Navigating the IOS; LAB 11: Clearing The Backup Configuration; LAB 12: Initial Router Configuration; LAB 13: Saving The Backup Configuration; LAB 14: Initial Switch Configuration; LAB 15: Configuring a Distribution Switch; LAB 16: Creating Standard Access Lists; LAB 17: Examine a Router; LAB 18: RIP Routing; LAB 19: IGRP Routing; LAB 20: IPX Router Config; LAB 21: IPX SAP Filtering; LAB 22: IPX Access List Security.

Neste outro link vocês encontraram os seguintes Labs para CCNP ROUTE:

LAB 1: Network Discovery-Router 1; LAB 2: Network Discovery-Router 2; LAB 3: Network Discovery-Router 3; LAB 4: Configuring Single Area OSPF 1; LAB 5: Configuring Single Area OSPF 2; LAB 6: Config OSPF NBMA Environment; LAB 7: Config OSPF NBMA Network; LAB 8: Config Multi-area OSPF Network; LAB 9: Verify Multi-area OSPF Network; LAB 10: Stub Areas; LAB 11: Totally Stubby Areas; LAB 12: Not So Stubby Areas Creation; LAB 13: Virtual Links Setup 1; LAB 14: Virtual Links Setup 2; LAB 15: IP Helper-Adress Command; LAB 16: Redundant EIGRP Routers A-C; LAB 17: Redundant EIGRP Routers D&E; LAB 18: Redundant EIGRP Testing; LAB 19: EIGRP Across Frame-Relay I; LAB 20: EIGRP Across Frame-Relay II; LAB 21: Configuring BGP; LAB 22: BGP Route Reflection AS 100; LAB 23: IGRP integration; LAB 24: Directed Broadcast Handling; LAB 25: Configuring Basic BGP; LAB 26: Creating a BGP Router Reflector; LAB 27: Configuring BGP Connection Weight; LAB 28: Modifying Redist Admin Distances; LAB 29: Redistribution with Router Filters; LAB 30: Router Map Creation.

E para finalizar, neste outro link vocês poderão encontrar os seguintes Labs CCNP SWITCH:

LAB 1: Configuring an Access Switch; LAB 2: Configuring a Distribution Switch; LAB 3: Backup Ethernet ASW1 to DSW2; LAB 4: Trunk Configuration; LAB 5: Activating and Limiting Trunking; LAB 6: Creating a VTP Domain; LAB 7: Verifying the VTP Domain; LAB 8: Testing the VTP Domain; LAB 9: Vlans to Access Switch Ports; LAB 10: Verifying Spanning Tree-Acc. Switch; LAB 11: Configure Fast Ethernet Channel; LAB 12: Configuring Uplink Fast Access Switch; LAB 13: Configuring the Route Processor; LAB 14: Configuring a Distribution Switch; LAB 15: Config MLS on Router & Switch I; LAB 16: Config MLS on Router & Switch II; LAB 17: Access Lists; LAB 18: HSRP and IP Multicast Routing; LAB 19: Creating a VTP Management Domain.

Fica ai a dica!

Bons estudos!